NOTE: Please print these steps as you will need to scan the barcode from a printed copy.
1) If your App has a Bluetooth option on the settings screen, disable it. It will be white when disabled.
2) In iOS settings go to the Bluetooth screen.
3) If you see Socket CHS appear under “My Devices”, press the blue info “i” button and press “Forget This Device”.
4) Disable Bluetooth (the toggle should now be white).
5) Power on the Socket Mobile scanner.
6) Press and hold down the scanner button and power button at the same time.
7) After you hear 3 beeps, release both buttons.
8) Power back on the Socket Mobile scanner.
9) Scan the barcode below to configure the Socket Mobile scanner.
10) Enable Bluetooth from iOS settings (the toggle should now be green).
11) You should see Socket CHS appear under “Devices”.
12) Press on the Socket CHS listing and after a few seconds it will display “Connected”.
Your Socket Mobile scanner is now paired.
Comments
Please sign in to leave a comment.